Insulation contractor in Dallas, NC - sealed attics and warmer floors
Complete Gastonia Insulation Services is an insulation contractor working in Dallas, NC. We fix what's wrong in attics and crawl spaces, seal the gaps, then add insulation so drafty rooms and hot upstairs bedrooms finally settle down.
Dallas as we see it from the attic
Dallas sits between Gastonia and Lincolnton, small enough that the historic courthouse square still feels like the middle of town. The houses on the streets around it tend to be the older ones, with low attics, crawl spaces underneath and whatever insulation somebody blew in a long time ago. Farther out, the newer neighborhoods have bonus rooms over the garage and ductwork running through the attic.
That split decides most Dallas jobs, because the older houses usually need cleanup and sealing before anything new goes in, and the newer ones usually need the attic and the room over the garage handled together.
Services in Dallas, NC
Attic insulation
In the older houses near downtown Dallas we often find a few inches of settled insulation, so the upstairs runs hot and the power bill runs high. Our attic insulation work brings the coverage up evenly all the way to the edges, where it's usually thinnest, instead of piling it in the middle.
Attic air sealing
Can lights, plumbing pipes and the attic hatch leave holes that pull air straight through the ceiling, whatever the age of the house. We seal those gaps before any new insulation goes down, so it isn't fighting a draft from the first day.
Crawl space insulation
Cold floors in the older Dallas houses usually trace back to a crawl space where the insulation has fallen out of the joists or never went in. We put it back tight to the underside of the floor once the space below is dry.
Crawl space vapor barrier
A crawl space with bare dirt for a floor keeps feeding moisture to the wood above it. We lay a vapor barrier over the ground first, because insulating over damp just hides the problem for a while.
Insulation removal
Some older Dallas attics hold insulation that's been soaked by an old roof leak or claimed by squirrels who never paid rent. We bag it, haul it out and clean the attic floor so the new material starts on something sound.
Spray foam insulation
The room over the garage in the newer neighborhoods runs hot because it has attic on most sides and ducts running past it. Spray foam seals and insulates in one pass, which is why it earns its higher price there and not in most other attics.
What a Dallas job involves before the crew shows up
Permits for Dallas addresses go through Gaston County's building inspections and permitting office, not the town, so when a job needs one, the county paperwork decides when our crew can start. To check a contractor, the state general contractors board says a general contractor must be licensed when the total project cost is $40,000 or more, and the Town of Dallas has its own business registration program, so it's fair to ask about both. We're licensed and insured, and we've been working on lived-in houses since 2013.
Once the paperwork's sorted, the price comes down to what's in your attic or crawl space right now. How many inches are already up there, whether the old material has to come out, how much sealing comes first and how hard the space is to get into all move the number, and what turns up under the old insulation moves the schedule. My estimate gives you the figure for your house. It's the same order of work we follow in Bessemer City and everywhere else we go, because skipping a step only costs you more later.
Why Dallas houses call us about cold floors and hot bedrooms
The older houses near the square usually sit over a crawl space, and a floor is only as warm as what's under it. When we find insulation hanging loose over damp ground, we deal with the moisture first and insulate second, because insulation over a wet crawl space just holds the water against your floor.
The newer houses have their own habit. The room over the garage stays hot no matter what the thermostat says, since the attic wraps around it and the ducts feeding it run through that same hot space.
Get a free insulation estimate for your Dallas house
We'll get back to you within one business day to set up a visit. I'll come to your Dallas house myself, look at the problem and give you a free on-site estimate, with no pressure and no obligation.
How it goes when you call us about a Dallas house
Call or send a message
Call (980) 745-0005 or use the form, and give us your Dallas address early. We work on both sides of the state line, and the address tells us which county and city offices cover your house.
I come out and look
I check the attic, walls, crawl space or basement myself and note what's in the way. Clearing a path to the attic hatch or crawl space door saves us both some crawling.
You get the written estimate
I write it up from what I saw, including anything that has to be fixed before insulation goes in. If something needs fixing first, I'll tell you rather than bury it.
We handle any permit paperwork
If your job needs a permit, we take care of the county paperwork before the crew is scheduled. The work starts once that's cleared.
Fix, seal, insulate, clean up
Our own crew fixes what has to come first, seals the gaps, then insulates and cleans up before leaving. I check the work before we call it done.
Dallas insulation questions we hear most
How much does it cost to insulate an attic in Dallas, NC?
Your price is set by what's already up there and how much has to be fixed before new insulation goes in, and I give you that figure at the estimate. The bigger choice is foam versus blown-in, which is loose fill blown through a hose. Foam costs more because it seals air while it insulates, and for most attics sealing the gaps and topping up the loose fill does the job for less, unless your ductwork lives up there.
Do I need a permit to add insulation in Dallas, NC?
The county's permit list doesn't settle it, because its residential packages name decks, additions, remodels, HVAC changeouts and water heaters, not insulation by itself. You can check through the county's permit applications page, and some jobs need another state or local approval before the application goes in. We check this for your address before we schedule and handle the paperwork when a permit is needed.
Which building code applies to insulation work in Dallas, NC?
The 2018 North Carolina State Building Code is still in effect, and it stays that way until the state sets the effective date for the 2024 code. The county's inspectors enforce the state code in Dallas. A building owner can ask to use the 2024 code as an alternative way of building, which mostly matters if you're planning a bigger project around it.
How do I know if my attic needs more insulation?
If you can see the tops of the ceiling joists from the hatch, there isn't much up there. Measure how many inches you have in the middle and near the eaves, because coverage often goes deep in the middle and thin at the edges, which is backward. Stay on the boards while you look, since I'd rather fix your insulation than your ceiling.
Can new insulation go over old insulation in a Dallas attic?
Yes, if the old insulation is dry and clean, and no if it's been soaked or is full of droppings. New material laid over a wet or dirty layer keeps the problem in your attic and adds a fresh layer on top of it. I check this at the estimate and tell you plainly whether it has to come out first.
How long do we have to stay out of the house after spray foam insulation?
The foam maker sets the re-entry time, which is when you can safely come back inside, and I'll tell you the time for the product we're using before we book the day. Blown-in insulation in an attic usually doesn't mean leaving the house at all. If you've got kids or pets, we plan the foam day around getting them out and back on schedule.
Tell us which Dallas room bothers you
Our hours run 6 AM to 11 PM every day, so call (980) 745-0005 after work or send the form and tell us which room is worst before I come out.